Monday, September 27, 2010

Using filter effects create fantastic images


Complete results are as follows:





1. Create a new document, width and height are 800 pixels, 600 pixels. Fill the image with a black background, the foreground and background color set to black and white, respectively. Select the menu "Filter> render> clouds", as shown.






2. Select the menu "Filter> Pixelate> copperplate engraving" in the pop-up dialog box, select the type of short strokes.



And the effect is as follows (due to the company using a win2k + ps6.0, under the map interface style is different, we make do with Kanba ^_^):



3. Then the key step in the implementation. Select the menu "Filter> Fuzzy> radial blur." Parameter settings are as follows:
Quantity: 100
Fuzzy methods: Zoom
Quality: best



Implementation of the 2 times of the operation, get a distorted effect, shown in Figure.






[Next]

4. Select the menu "Filter> distort> rotation distortions", set the angle of 120 degrees. Rotate the image slightly.



5. Now is not the image look more interesting? Next we will go further and make it more interesting and mysterious. Copy the current layer (if you create a new document using the system default settings, then the current should be only one layer, the background layer), and then use the method of step 4, copy the layer to operate. Note that this time we need to set the rotation angle of -180 degrees. Completed, and then mixed into the layers brighten. Of course, the use of other models will be different layers of interesting effects, you can personally test it.








6. Now add a little color for the image. Select the menu "Image> adjust> hue / saturation" in the pop-up menu, make the following settings:
Hue: 0
Saturation: 25
Brightness: 0
Color: Select




This will become a reddish color image transfer. Of course, you need not be limited to such a color, you can transfer it into any color you want.




7. Now the image looks pretty good. But we have room for improvement well. Repeat step 6 of the operation, but this time we are operating against the background layer, set the following parameters:
Hue: 202
Saturation: 63
Brightness: 0
Color: Select






8. Finally, we remove the image in some of the fuzzy pixels, sharpening the image. First merge layers, select the menu "Layer> Merge visible layers." Then select "Filter> Sharpen> USM sharpening" parameter as follows:



Quantity: 500%
Radius: 0.5 pixels
Threshold: 0 Levels



OK, you're done.












Recommended links:



3G2 to MOV



Associate



Sina Focus M & A suspected insider trading Fosun



Chen Mei: The change in SELF-PERFECTION



PB8 How to get in the character string containing the length of the problem - Davis Summary



2006: Five suspense Notebook



AVI to Zune



Liang No. 400 400 640 074 008 TAKE your pick



Top File Compression



British grams, Novel Medicine 1000 Chain layout help



Comment Screen Capture



The SMTP user authentication based on QMail Setup Guide (PART Two)



Geography EDUCATION Shop



Expert Audio Video Tools



ASF to MPG



Tuesday, September 14, 2010

Watch cool mechanical picture production process


1. Open a head of the image, such as (Figure 1), the actual production in the absence of such images, then you can find a side face and a positive face to be put together combinations.



Figure 01

2. With the pen tool to outline the contours of head, then the path into constituencies, some of the selected picture to copy and paste, in order to facilitate the description, the first layer to give a name, called 'first one'. After the completion of a new layer above the background layer, named 'black background' and fill this layer with black. Of course, you can also choose another color fill, and I chose black because the black are more filled with mystery. Filling is complete, return to 'first one' layer, the implementation of the menu - Image - Adjust - Curves, adjust the color of the head is dark, dark look at the degree as long as the head of the neck part of the neck of the color adjustment, almost in the black it can be , and the local can not adjust to the dark areas also can be coated with a slightly better tool to deepen the color on it (Figure 2).



Figure 02

3. The next thing to do is to be handled face skin smooth, is quite a simple tool to add a few filters and some mixed-mode can be done, first 'head an' a copy layer as' the first one copy 'layer, the implementation of the menu - filter - variegated - the middle value, the radius is set to 12 pixels or so (Figure 3) so the face looks relatively smooth, but after this treatment, "the eyes, nose" child and other parts of the face also will blur together, and do not worry, let them show up the next step.



Figure 03

4. Select the eraser tool to brush size is set to facilitate the erasure of the size, the size does not matter, as long as you can to facilitate their operation, and then set the eraser's opacity to 20% of those in the face such as "eyes, mouth, nose," and other major components rubbed Department to make 'head an' layer in the clear "eyes, nose," and some other exposed (Figure 4).



Figure 04

5. Rubbed After the 'first one' layer with the 'head a copy of the' layers into a single 'head a copy of the' layer. The front to face the following metal feeling, first with a combined 'first one copy' to copy a layer for the 'head a copy of the 2' layer, the implementation of the menu - filter - stylized - light edge, the edge width set to 1, the edge of the brightness set to 20, then the smoothness set to 15. Upon completion, such as (Figure 5). Illuminate the edge of the filter after the completion of the edge in the picture, such as the chin on both sides of head formation of white spots, you can use the eraser tool to erase the day shift.



Figure 05

6. The 'head a copy of the 2' layer of the mixed mode is changed to the screen, and as step 4, as with the eraser tool in the 'head a copy of the 2' layer of the "eyes, nose, mouth," and other parts of clean, completed after the implementation of the menu - Image - adjust - to color. Such as (Figure 6).



Figure 06




[Next]



7. Now people can see the faces of the metal wire thread has generated, but the color of the face did not know better, do not like metal, let's give it some adjustments to make her look cool. Back to the 'head a copy of the' layer implementation of the menu - Image - adjust - to color, then the implementation of the menu - Image - Adjust - Color Balance, Levels parameter box in the order of input -25,0,15 (Figure 7).



Figure 07

8. Completed before the 'head and a copy of the 2' copy the one for 'head a copy of the 3', and placed in the top layer panel. Implementation of the menu - Filter - Fuzzy - Gaussian blur, radius of the fuzzy set to 8 pixels around, and this layer change the blend mode superposition (Fig. 8) that after the completion of the human face on the strength of the metal being .



Figure 08

9. Below the eyes to give them a change of color, to add some weird, alternative feel. First outlined with the pen tool face frontal eye eyes, and hook a good path into constituencies, the implementation of the menu - select - emergence, emergence of constituencies 1 pixel, so that changes color to make eyes even after Nenggen surrounding the integration of soft colors, and then back to 'head a copy of the' layers, the implementation of the menu - image - adjustments - color balance, color adjustment can be their own, do not show here (Fig. 9). Upon completion of the method of using sheep's head, the eyes of people on both sides to do color adjustment, after the completion of the command will use the curve 'head a copy of the' layers of color a little bit brighter, then the implementation of the menu - Image - adjust - brightness. Contrast, the brightness is set to -50, the contrast set to 40, so that people face after the completion of the metal effect is even more strongly (Figure 10).



Figure 09



Figure 10

10. Well, robot faces have basically almost the same, the following were the head of the mechanical parts to do with the wires. First to do both sides of the face of the section, select the pen tool to face down the dark side part of the filter were generated and subject to outline the path towards the curve (Figure 11). To 'head a copy of the' layer, the path is converted to constituencies, and copy the selected image, and then back to 'head a copy of the 3' layer, press CTRL + V, will copy the image into layers panel top, and renamed this layer 'part 1'. Then double click the layer, the layer style panel Gouxuan 'bevel and embossed' effect. The relief depth is set to 400%, the direction of choice 'under', the 'size' is set to 7 pixels, 'softening' is set to 4 pixels, then 'point' is set to 8 degrees, height is set to 51 degree, the other unchanged (Figure 12).



Figure 11



Figure 12




[Next]



11. Will be 'part 1' to copy a layer for the 'part 1 copy' layer, the implementation of the menu - Edit - Free Transform, to copy the image slightly narrowed a bit, and put to such (Figure 13) position. Then this layer into two parts a 'part a copy of the' layer, then the implementation of the menu - filter - variegated - Add variegated, to enhance the effect of what parts of the material. The number is set to 10% variegated, select the Gaussian distribution, and Gouxuan monochrome options (Figure 14).



Figure 13



Figure 14

12. Select the eraser tool, this part inside edge of the image slightly rubbed short, it can be a reasonable integration with other image (Figure 15). Finished with the mop parts of the image after the copy of this as 'part one copy of a copy' layer and move it to the side of a side face the implementation of the menu - Edit - Transform - Flip Horizontal, when completed, will the image move the inside face position (Figure 16).



Figure 15



Figure 16

13. Well, following positive people face to do the mechanical part, methods similar to step 10, first along the face with a pen to outline the metal texture in the face of the parts attached to the path (Figure 17).



Figure 17

14. The path to convert the constituency, to the 'head a copy of the' layer, copy the constituency of the image, and copy the image into layers panel, the top level, and this paste with the new layer name to 'Part 2'. Double click this layer, the layer style panel Gouxuan 'projection' and 'slope relief' effect. The projection distance is set to 0 pixels, is set to expand 70%, the size is set to 8 pixels, other unchanged; then ramp the depth of relief is set to 500%, the size is set to 38 pixels, softening set to 2 pixels, and the abolition of global light settings, the angle set to 90 degrees, high set around 5 degrees, and change the gloss contour as the first row of the third style, the other unchanged. Completed after the implementation of the menu - filter - variegated - Add variegated, the number of variegated set to 5% (Figure 18).



Figure 18




[Next]

15. In the Layers panel to create a new layer on top of it with the 'Part 2' layers merge, the merged layers renamed 'Part 2'. And then double-click this layer, the layer style panel Gouxuan 'projection' and 'slope relief' effect, the projection distance is set to 0 pixels, expansion is set to 70%, the size is set to 3 pixels, Others make no changes; then ramp the depth of relief is set to 200%, the size is set to 7 pixels, softening is set to 0, others unchanged, and this layer change the blend mode superposition. Then use the eraser tool to complete, this "part" wipe some gray around the image (Figure 19).



Figure 19

16. Well, face a large part basically completed, the following components to complete a small part. The top level in the layer panel to create a new layer, named 'part 3'. Select the brush tool, brush size set to 15 pixels, hardness is set to 100%, in the face point of three dots on the forehead, (Figure 20). Then select the eraser tool to brush size set to 6 pixels, the hardness is set to 100. Three dots at the center click erase color (Figure 21).



Figure 20



Figure 21

17. Double-click this layer, Gouxuan relief projection and slope effect, the projection distance is set to 0 pixels, the other remained unchanged; slope relief do not do to set the parameters, can be directly determined. This layer of mixed mode and change the overlay (Figure 22).



Figure 22

18. The most top layer panel to create a new layer, named the 'part 4'. Select the brush tool, brush size set to 30 pixels, hardness is set to 100%, in the left face of the sun position point point a point, use the Rectangular Marquee Tool, hold down the SHIFT horizontal and vertical in the middle of each round, variant two pixels, and to delete the selected area. Upon completion press CTRL + T and then hold down SHIFT to rotate 45 degrees round, then the Rectangular Marquee Tool, variant round two of the middle horizontal and vertical pixels, and remove the selection section (Figure 23). Then double-click this layer, the layer style panel Gouxuan slope relief effect, the distance is set to 1, softening is set to 0, others unchanged. Elliptical Marquee tool and then used to complete one part-framed and tracked, and remove (Figure 24).



Figure 23



Figure 24




[Next]



19. This circular replication 3, press CTRL + T be proportionally reduced, and the head placed to the left of the face, after the completion of this four round parts of the layers merge, and layers Mixed mode is changed to 'light' (Figure 25).



Figure 25

20. Well, the left side of face parts basically completed, the following can add some text to it's face, the practice is not difficult, first use the text tool to enter text, good-bye to delete the text layer as an ordinary cell layer, and then were set with the lasso tool to select each word, then CTRL + T, according to the head one by one face of the arc of rotation to adjust the text position (Figure 26). Double-click the text after the completion of layers, Gouxuan slope relief effect, select the pillow embossed relief pattern, then size is set to 0 pixels, the other unchanged. Completed before the layer of mixed-mode changed to 'stack', and to reduce the layer opacity to 50% (Figure 27).



Figure 26



Figure 27

21. The right side of the face can also be used similar methods to be decorated, or you can import a graphic icon to do some of the existing decorations, only to change into after the layer of mixed mode or increase the effect of some of the layers can be made icon with the face to be more natural integration of the different effects of mixed-mode are also different (Figure 28), or a similar way than their own to do some small parts add up to make dotted (Figure 29).



Figure 28



Figure 29

22. Here the head of the robot to do the cables of the! Are also very simple, strokes plus a further layer styles can be buttoned a bit of rubbed. First panel in the top layer a new layer, named 'cable 1'. Select the Pen tool in the head neck area of a pen sketch the path (Figure 30). Then select the brush tool, brush size set to 10 pixels, hardness is set to 100%, and the foreground color set to gray. Then the path panel, click the panel below the 'Stroke path with foreground color' button. Stroke may pen path after delete (Figure 31).



Figure 30




[Next]





Figure 31

23. Back to the Layers panel, Double click 'cable 1' layer, layer style in the pop-up panel Gouxuan 'ramp relief' with the 'gloss' effect.灏嗘诞闆曠殑娣卞害璁剧疆涓?00%锛屽彇娑堥槾褰变腑鐨勫叏灞?厜璁剧疆锛屽皢瑙掑害璁剧疆涓?105搴︼紝楂樺害璁剧疆涓?5搴︼紝鍏夋辰绛夐珮绾块?鎷╃浜屾帓绗?绉嶆牱寮忥紙鍥?2锛夈?杩欐牱瀹屾垚鍚庣殑鐢电紗灏辨湁绔嬩綋鎰熷強鍏夋辰銆佺汗鐞嗙殑鎰熻浜嗐?浣嗘槸锛屽彲浠ョ湅鍒扮數缂嗙殑涓ゅご涔熷悓鏃舵湁浜嗘诞闆曠殑鎰熻锛屼笖闈犺繎涓嬪反鐨勯偅涓?鐨勫厜娉藉お浜簡锛岃繖鏍峰氨浣垮緱鐢电紗璺熷ご閮ㄧ粨鍚堝緱涓嶈嚜鐒朵簡銆傛墍浠ュ緱鎶娾?鐢电紗鈥欎袱澶寸殑娴洉鍘婚櫎鎺夛紝鏂规硶灏辨槸鐢ㄦ鐨摝鎿﹂櫎锛屼絾鏄氨杩欐牱鎿︾殑璇濃?鐢电紗鈥欎笂鎵?叿鏈夌殑娴洉鏁堟灉浼氬悓鏃舵敼鍙樸?鍥犳锛屼笉鑳藉氨杩欐牱鐩存帴鎿﹂櫎锛岄偅鎬庝箞鍔烇紵涓嬮潰灏辨潵瑙e喅杩欎釜闂銆?br />


Figure 32

銆??24.鍦ㄢ?鐢电紗1鈥欏浘灞傜殑涓婇潰鏂板缓涓?釜鍥惧眰锛屽苟灏嗘鍥惧眰涓庘?鐢电紗1鈥欏浘灞傚悎骞讹紝杩欐牱鍋氫簡浠ュ悗锛屽彲浠ョ湅鍒板浘灞傞潰鏉夸腑鍘熸湰鐨勨?鐢电紗鈥欙紙宸插悎骞讹級鍥惧眰涓墍甯︽湁鐨勨?娴洉鍙婂厜娉解?鏁堟灉鐨勫睘鎬у眰娌℃湁浜嗭紝鍥犱负瀹冧滑琚悎骞朵簡锛屼篃灏辨槸璇寸幇鍦ㄧ殑鈥樼數缂?鈥欏浘灞傚氨鏄竴涓病鏈変换浣曞浘灞傛晥鏋滅殑鏅?鍥惧眰锛屼絾鏄敾闈笂鈥樻诞闆曗?鍙娾?鍏夋辰鈥欑殑鏁堟灉杩樻槸閭f牱娌℃湁鍙樸?閭d箞鐜板湪灏卞彲浠ヤ娇鐢ㄦ鐨摝宸ュ叿浜嗭紝鍏堝皢姗$毊鎿︾殑涓嶉?鏄庡害璁剧疆涓?0%宸﹀彸锛岀‖搴﹁缃负0%锛屾鐨摝鐨勭洿寰勫彲鑷繁璁剧疆锛屼究浜庢搷浣滃氨鍙互銆傜劧鍚庡湪闈犺繎涓嬪反澶勭殑閭eご绋嶅仛鎿︽嫮銆傚畬鎴愬悗鍐嶆墽琛岃彍鍗?缂栬緫-鑷敱鍙樻崲锛岀敤榧犳爣鎷栧姩鍙樻崲妗嗕笅绔殑鑺傜偣锛屾妸鈥樼數缂嗏?涓嬬鐨勯偅澶存嫋鍒板浘鍍忓闈㈠幓锛岃繖鏍封?鐢电紗鈥欎笅绔殑娴洉鏁堟灉鍦ㄧ敾闈腑涔熷氨鐪嬩笉瑙佷簡锛堝浘33锛夈?瀹屾垚鍚庝緷鐒跺皢姝ゅ悎骞朵簡鐨勨?鐢电紗鈥欏浘灞傛敼鍚嶄负鈥樼數缂?鈥欍?



Figure 32



Figure 33

銆??25.渚濈収涓婅瘔鍋氭硶鏉ュ埗浣滃叾瀹冪殑鐢电紗锛屽湪鍒朵綔杩囩▼涓娉ㄦ剰锛屾瘡鏂板仛涓?牴鐢电紗瑕佹柊寤轰竴涓浘灞傦紝骞朵笖涓轰簡浣库?鐢电紗鈥欑湅璧锋潵鑷劧澶氬彉锛屽湪鎵?嬀鐢婚挗绗旇矾寰勭殑鏃跺?锛岃矾寰勭殑璧板悜瑕佹敞鎰忔湁鍙樺寲锛屽苟涓斿湪鎻忚竟璺緞鐨勬椂鍊欏彲浠ユ敼鍙樼敾绗旂洿寰勭殑澶у皬锛岃繖鏍峰仛鍑烘潵鐨勨?鐢电紗鈥欏氨绮楃粏涓嶄竴浜嗭紝鍚屾椂鍦ㄦ坊鍔犫?鏂滈潰娴洉鈥欐晥鏋滅殑鏃跺?鍙互閫傚綋鏀瑰彉鈥樻诞闆曗?鐨勮搴﹁窡楂樺害銆傝繕鏈夊氨鏄鏋滅敾杈冪矖鐨勨?鐢电紗鈥欐椂锛屽湪娣诲姞鈥樻枩闈㈡诞闆曗?鏁堟灉鐨勬椂鍊欒娉ㄦ剰灏嗘诞闆曠殑澶у皬鍔犲ぇ锛屼笉鐒剁殑璇濈數缂嗙湅璧锋潵浼氫笉鍦嗘粦锛堝浘34锛夈?



Figure 34

銆??26.濂戒簡锛岀數缂嗗ぇ鑷村凡缁忎綔濂斤紝浣嗘槸杩樼己涔忕偣璐ㄦ劅璺熷眰娆℃劅锛屼笅闈㈠氨鏉ヤ负鐢电紗娣诲姞璐ㄦ劅璺熷眰娆°?鍦ㄦ瘡涓?釜鐢电紗鐨勫眰涓婃墽琛岃彍鍗?婊ら暅-鏉傝壊-娣诲姞鏉傝壊锛屽皢鏉傝壊鐨勬暟閲忚缃负3%锛岄?鎷╅珮鏂垎甯冿紝骞堕挬閫夊崟鑹查?椤癸紙鍥?5锛夈?



Figure 35




[Next]



銆??27.璐ㄦ劅鏈変簡锛岃繕缂哄皯鐨勬槸鍚勭數缂嗕箣闂寸殑灞傛鎰燂紝鍋氭硶涔熷緢瀹规槗銆傜敤榧犳爣鍙屽嚮鐢电紗鐨勫浘灞傦紝鍦ㄥ浘灞傛牱寮忛潰鏉夸腑閽╅?鈥樻姇褰扁?鍙娾?鍐呴槾褰扁?鏁堟灉锛屽皢鎶曞奖鐨勮窛绂昏缃负2涓薄绱狅紝鎵╁睍璁剧疆涓?0%澶у皬璁剧疆涓?涓薄绱狅紝鍏跺畠涓嶅彉銆傛瘡涓浘灞傞兘浣滃姝よ缃紝杩欐牱鍚勭數缂嗕箣闂村氨鏄惧緱鏈夊墠鍚庣殑灞傛浜嗭紝浣嗘湁涓?偣瑕佹敞鎰忥紝杈冪矖鐨勭數缂嗗彲浠ョ収涓婅堪鏂规硶璁剧疆锛屼絾杈冪粏鐨勫氨涓嶅彲浠ヤ簡锛屽湪璁剧疆杈冪粏鐢电紗鏃堕偅鎵?湁鐨勫弬鏁板?灏卞緱鐩稿簲鍑忓皬锛堝浘36锛夈?



Figure 36

銆??28.鐜板湪鐨勭數缂嗙湅璧锋潵灏卞樊涓嶅浜嗐?浣嗘槸鎰熻杩樻槸澶崟钖勪簡銆傞偅涔堝彲浠ョ户缁粰澶撮娣诲姞涓?簺鐢电紗浠ュ仛琛ュ厖锛屼絾鏄殑鐢电紗鐪嬭捣鏉ュ凡缁忔槸鏈?灞傜殑鐢电紗浜嗭紝鎵?互濡傛灉瑕佸啀鍔犵數缂嗙殑璇濆氨寰楀姞鍦ㄧ幇鏈夌殑鐢电紗鐨勪笅闈?鎵?互鎴戜滑寰楀湪鏈?垵鎵?仛鐨勯偅鏍圭數缂嗗浘灞傜殑涓嬮潰鏂板缓鍥惧眰鏉ュ埗浣滐紝鍒朵綔鐨勬柟娉曡窡鍓嶉潰鍒朵綔鐢电紗鐨勬柟娉曟槸涓?牱鐨勩?鍙槸鍦ㄥ畬鎴愬悗鍙皢杩欎簺鐢电紗鐨勯鑹茬敤鏇茬嚎鍛戒护绋嶇◢浣滆皟鑺傦紝璋冪殑棰滆壊鍙瘮涓婇潰鍑犲眰鐢电紗鐨勯鑹茬◢鏆楋紝杩欐牱灏辫兘浣胯繖浜涚數缂嗙湅涓婂幓鏈夊墠鍚庣殑灞傛鎰熶簡锛堝浘37锛夈?



Figure 37

銆??29.涓嬮潰鏉ュ仛浜哄ご涓婇潰鐨勭數缂?鍦ㄥ浘灞傞潰鏉挎渶涓婂眰鏂板缓涓?釜鍥惧眰,鍙栧悕鈥樺ご閮ㄧ數缂?鈥欍?鐢ㄩ挗绗斿伐鍏蜂粠宸︿晶浜哄ご鐨勫お闃崇┐澶勫紑濮嬮挬(鍥?8)銆傚畬鎴愬悗閫夋嫨鐢荤瑪宸ュ叿锛屽皢绗旇Е鐨勭洿寰勮缃缃负10涓薄绱狅紝纭害璁剧疆涓?00%锛屽苟灏嗗墠鏅壊璁剧疆涓虹伆鑹诧紝鐒跺悗鍒拌矾寰勯潰鏉跨偣鍑荤敤鍓嶆櫙鑹叉弿杈硅矾寰勭殑鎸夐挳锛屽啀鐢ㄩ紶鏍囧弻鍑绘鍥惧眰锛屽湪鍥惧眰鏍峰紡闈㈡澘涓挬閫夆?鍐呴槾褰扁?銆佲?鏂滈潰娴洉鈥欏強鈥樼瓑楂樼嚎鈥欐晥鏋滐紝鍐呴槾褰卞弬鏁颁笉鍋氳缃紝鎸夌収榛樿锛涘皢娴洉鐨勫ぇ灏忚缃负25涓薄绱狅紝杞寲璁剧疆涓?锛屽苟鍙栨秷鍏ㄥ眬鍏夎缃紝灏嗚搴﹁缃负90搴︼紝楂樺害璁剧疆涓?5搴︼紝鍏跺畠涓嶅彉锛涘啀灏嗙瓑楂樼嚎涓殑绛夐珮绾挎牱寮忔洿鏀逛负绗簩鎺掔涓?鏍峰紡锛屽叾瀹冧笉鍙橈紙鍥?9锛夈?



Figure 38



Figure 39

銆??30.瀹屾垚鍚庡悓鏍风粰鐢电紗娣诲姞3%宸﹀彸鐨勬潅鐐癸紝骞朵笖鐢ㄦ鐨摝宸ュ叿鍦ㄧ數缂嗙殑涓婄娑傛摝锛屽皢鍏堕鑹叉摝娣★紙鍥?0锛夈?瀹屾垚鍚庡皢姝ょ數缂嗗鍒朵竴浠斤紝鎵ц鑿滃崟-缂栬緫-鍙樻崲-姘村钩缈昏浆锛屽苟灏嗙炕杞悗鐨勭數缂嗙Щ鑷冲彸渚ц劯閮ㄧ殑澶槼绌村锛堝浘41锛夈?



Figure 40



Figure 41




[Next]

銆??31.涓や晶澶撮涓婄殑鐢电紗瀹屾垚浜嗭紝涓嬮潰灏辨槸涓棿澶撮涓婁笁涓瓟涓殑鐢电紗浜嗐?鍏堝湪鍥惧眰闈㈡澘鐨勬渶涓婂眰鏂板缓涓?釜鍥惧眰锛屽彇鍚嶁?涓數缂嗏?銆傜敤閽㈢瑪宸ュ叿鍕惧嫆鍑虹數缂嗙殑璺緞锛堝浘42锛夈?瀹屾垚鍚庨?鎷╃敾绗斿伐鍏凤紝灏嗙敾绗旂殑鐩村緞璁剧疆涓?涓薄绱狅紝纭害璁剧疆涓?00%锛岀粰璺緞杩涜鎻忚竟銆傚畬鎴愬悗鍐嶇敤榧犳爣鍙屽嚮姝ゅ浘灞傦紝鍦ㄥ浘灞傛牱寮忛潰鏉夸腑閽╅?鈥樺唴闃村奖鈥欏強鈥樻枩闈㈡诞闆曗?鏁堟灉锛屽唴闃村奖鐨勫弬鏁版寜鐓ч粯璁わ紝涓嶅仛璁剧疆銆傚皢鏂滈潰娴洉鐨勫ぇ灏忚缃负5涓薄绱狅紝杞寲璁剧疆涓?涓薄绱狅紝骞跺彇娑堝叏灞?厜璁剧疆锛屽皢瑙掑害璁剧疆涓?40搴︼紝楂樺害璁剧疆涓?9搴︼紝鍏跺畠涓嶅彉銆傚畬鎴愬悗鍚屾牱鍦ㄦ鍥惧眰鐨勪笂闈㈡柊寤轰竴涓浘灞傦紝骞跺皢鏂板浘灞備笌姝ょ數缂嗗浘灞傚悎骞躲?鐒跺悗鍐嶅悓鏍蜂负鍏舵坊鍔?%鐨勬潅鑹层?鎵?湁杩欎簺瀹屾垚鍚庡啀鐢ㄦ鐨摝宸ュ叿灏嗙數缂嗕竴绔殑棰滆壊鎿︽贰锛堝浘43锛夈?鍏跺畠涓や釜瀛斾腑鐨勭數缂嗙殑鍋氭硶涔熸槸鐩稿悓鐨勶紝鍙槸鍦ㄥ嬀閽㈢瑪璺緞鐨勬椂鍊欙紝璺緞鐨勮蛋鍚戝彲浠ユⅱ鍋氬彉鍖栵紙鍥?4锛夈?



Figure 42



Figure 43



Figure 44

銆??32.鏈?悗杩樺彲浠ョ粰宸︿晶鑴镐笂鍔犲嚑鏍圭粏鐢电紗锛屽仛娉曡窡涓婇潰鐨勬槸鐩稿悓鐨勶紝鍙槸鍦ㄦ弿杈硅矾寰勭殑鏃跺?灏嗙敾绗旂殑鐩村緞鍑忓皬鑷?涓薄绱犲乏鍙筹紝鍏跺畠閮戒竴鏍风殑锛屽苟涓斿彲浠ュ皢瀹屾垚鐨勮矾寰勫鍒跺嚑浠芥憜鏀惧埌鍚堥?鐨勪綅缃紝闀跨煭涓嶅悎閫傜殑璇濆彲鐢ㄨ嚜鐢卞彉鎹㈠懡浠ょ◢浣滆皟鑺傦紙鍥?5锛夈?



Figure 45

銆??33.濂戒簡锛岀數缂嗗凡缁忓熀鏈畬鎴愪簡锛屼絾鏄氨杩欐牱鐨勭數缂嗙湅璧锋潵鏈夌偣绠?崟浜嗐?涓嬮潰鏉ヤ负鐢电紗鍋氫竴浜涚偣缂??鍏堥?鎷╀汉澶翠笅闈㈣緝绮楃殑涓?牴鐢电紗锛屽洜涓烘湁寰堝鐨勭數缂嗗湪锛屾墍浠ュ湪鍥惧眰涓洿鎺ラ?鎷╃殑鏃跺?鍙兘浼氭瘮杈冮夯鐑︼紝杩欓噷鍏堣涓?釜绠?崟鐨勯?鎷╂柟娉曪細鎸変綇CTRL+ALT鐩存帴鐢ㄩ紶鏍囧彸閿偣鍑绘墍鎯宠閫夋嫨鐨勫浘璞″氨鍙互鐩存帴璺宠浆鍒伴偅涓浘灞備簡銆傚啀鐢ㄩ挗绗斿伐鍏烽挬閫夊嚭鐢电紗涓婄殑涓?儴鍒嗭紙鍥?6锛夈?瀹屾垚鍚庡皢璺緞杞崲涓洪?鍖猴紝骞跺鍒堕?涓儴鍒嗗啀鎸塁TRL+V绮樿创銆傚畬鎴愬悗鍐嶆绮樿创鐨勫浘璞′笂闈㈡柊寤轰竴涓浘灞傦紝鐢ㄩ挗绗斿伐鍏峰湪绮樿创鐨勫浘璞¤寖鍥村唴鍕剧敾鍑轰竴鏉′竴鏉℃兂铻轰笣缃楃汗涓?牱鐨勭瓑璺濈鐨勮矾寰勶紙鍥?7锛夈?



Figure 46



Figure 47




[Next]




銆??34.璺緞鍕惧畬鍚庨?鎷╃敾绗斿伐鍏凤紝灏嗙敾绗旂洿寰勮缃负2涓薄绱狅紝纭害璁剧疆涓?00%锛屽啀瀵硅矾寰勮繘琛屾弿杈癸紝瀹屾垚鍚庢寜浣廋TRL鐐瑰嚮姝ゅ浘灞備娇杩欎簺绾挎鐨勯?鍖烘诞璧凤紝鐒跺悗鍐嶅洖鍒颁笅闈㈢矘璐寸殑鐢电紗娈电殑鍥惧眰锛屾寜DELETE鍒犻櫎閫夊尯閮ㄥ垎锛屽苟灏嗙嚎娈电殑鍥惧眰鍒犻櫎銆傦紙鍥?8锛夈?瀹屾垚鍚庣敤榧犳爣鍙屽嚮鐢电紗娈电殑鍥惧眰锛屽湪鍥惧眰鏍峰紡闈㈡澘涓挬閫夆?鎶曞奖鈥欒窡鈥樺唴闃村奖鈥欐晥鏋滐紝灏嗘姇褰辩殑璺濈銆佹墿灞曘?澶у皬鍏ㄩ儴璁剧疆涓?锛屽叾瀹冧笉鍙橈紝鍐嶅皢鍐呴槾褰辩殑鍏ㄥ眬鍏夎缃彇娑堬紝灏嗚搴﹁缃负-35搴︼紝璺濈璁剧疆涓?涓薄绱狅紝闃诲涓?%锛屽ぇ灏忚缃负2涓薄绱狅紝鍏跺畠涓嶅彉銆傚畬鎴愬悗鍐嶆墽琛岃彍鍗?缂栬緫-鑷敱鍙樻崲锛屾寜浣廠HIFT灏嗘鐢电紗娈靛浘璞″悓姣斾緥鏀惧ぇ涓?簺锛屽苟鍙墽琛岃彍鍗?鍥捐薄-鍙樻崲-鑹插僵骞宠 锛屽皢姝ょ數缂嗘鐨勯鑹茬◢鍋氭敼鍙橈紝骞跺皢姝ゅ浘灞傜殑娣峰悎妯″紡鏇存敼涓衡?鍙犲姞鈥欙紙鍥?9锛夈?



Figure 48



Figure 49

銆??35.鍖呬綇鐢电紗鐨勭嚎鍦堝氨鍙敤绫讳技鐨勬柟娉曞幓鍒朵綔锛屼笅闈㈠啀鏉ュ姞涓?簺鍒殑閮ㄤ欢锛屽厛鍦ㄥ浘灞傞潰鏉跨殑鏈?《绔柊寤轰竴涓浘灞傦紝閫夋嫨鐢荤瑪宸ュ叿锛屽皢鐢荤瑪澶у皬璁剧疆涓?-7涓薄绱狅紝娌跨潃涓嬫柟杈冪矖鐨勭數缂嗙殑璧板悜鐐逛竴鎺掑皬鐐癸紙鍥?0锛夊畬鎴愬悗鐢ㄩ紶鏍囧弻鍑绘鍥惧眰锛屽湪鍥惧眰鏍峰紡闈㈡澘涓挬閫夆?鍐呴槾褰扁?鍙娾?鍏夋辰鏁堟灉鈥欙紝灏嗗唴闃村奖鐨勪笉閫忔槑搴﹁缃负100%锛岃窛绂昏缃负0涓薄绱狅紝闃诲璁剧疆涓?0%锛屽ぇ灏忚缃负2涓薄绱狅紝骞跺皢鍏夋辰绛夐珮绾挎洿鏀逛负绗竴鎺掔浜岀鏍峰紡锛堝浘51锛夈?



Figure 50



Figure 51

銆??36.濂戒簡锛屽叾瀹冪殑閮ㄤ欢鍙互鐢ㄤ笂杩颁袱绉嶇被浼肩殑鏂规硶鍒朵綔锛岃嚜宸卞彂鎸ヤ竴涓嬪惂锛屾垨鑰呰?蹇冨ソ鐨勮瘽涔熷彲浠ョ敤閽㈢瑪宸ュ叿娌跨潃鐢电紗鐨勭珛浣撳姬搴﹂挬涓?釜缁嗙殑璺緞锛岀劧鍚庣敤鐢荤瑪宸ュ叿锛岃缃敾绗斿ぇ灏忎负1涓薄绱狅紝鍓嶆櫙鑹蹭负榛戣壊锛屽啀杩涜鎻忚竟璺緞锛岀劧鍚庢部鐫?數缂嗙殑璧板悜涓?釜涓殑鎺掗儴锛堝浘52锛夈?



Figure 52

銆??37.濂戒簡锛屽埌杩欏氨鍙互绠楁槸缁撴潫浜嗭紝濡傛灉瀵归鑹蹭笉婊℃剰涔嬪杩樺彲浠ラ?杩嘋TRL+B鎴栬?CTRL+U瀵逛笉婊℃剰鐨勫浘灞傚仛棰滆壊鐨勮皟鏁达紝杩欓噷灏变笉缁嗚浜嗭紙鍥?3锛夈?



Figure 53






相关链接:



Iphone video format



Mts Conversion



Mpeg To Avi Converter



Convert Mkv Files